In Vivo (Add solvents to the product individually and in order.)
Homogeneous suspension
CMC-NA
≥5mg/ml
Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Clear solution
5%DMSO
40%PEG300
5%Tween80
50%ddH2O
Validated by Selleck labs. Should you need adjustments to this formulation, contact our sales team for custom testing.
3.9mg/ml
(9.94mM)
Taking the 1 mL working solution as an example, add 50 μL of 78 mg/ml clarified DMSO stock solution to 400 μL of PEG300, mix evenly to clarify it; add 50 μL of Tween80 to the above system, mix evenly to clarify; then continue to add 500 μL of ddH2O to adjust the volume to 1 mL. The mixed solution should be used immediately for optimal results.
Clear solution
5% DMSO
95% Corn oil
Validated by Selleck labs. Should you need adjustments to this formulation, contact our sales team for custom testing.
0.55mg/ml
(1.40mM)
Taking the 1 mL working solution as an example, add 50 μL of 11 mg/ml clear DMSO stock solution to 950 μL of corn oil and mix evenly. The mixed solution should be used immediately for optimal results.
* <1 mg/ml means slightly soluble or insoluble. * Please note that Selleck tests the solubility of all compounds in-house, and the actual solubility may differ slightly from published values. This is normal and is due to slight batch-to-batch variations. * Room temperature shipping (Stability testing shows this product can be shipped without any cooling measures.)
Preparing Stock Solutions
Biological Activity
Description
Decernotinib (VX-509) is a potent and selective JAK3 inhibitor with Ki of 2.5 nM, demonstrating >4-fold selectivity over JAK1, JAK2, and TYK2, respectively. It is currently in Phase 2/3.
Targets
JAK3
JAK1
JAK1
JAK2
TYK2
2.5 nM(Ki)
11 nM
11 nM(Ki)
13 nM(Ki)
13 nM(Ki)
In vitro
In HT-2 cells, Decernotinib (VX-509) inhibits IL-2–stimulated HT-2 STAT-5 phosphorylation, human T-cell blast proliferation, and CD40L/IL-4–induced B-cell proliferation.
In Vivo
In a rat model of collagen-induced arthritis, S7541 (50 mg/kg, p.o.) results in dose-dependent reduction in ankle swelling and paw weight and improved paw histopathology scores. In a mouse model of oxazolone-induced delayed-type hypersensitivity, S7541 (50 mg/kg, p.o.) significantly suppresses ear edema. In a rat HvG model, S7541 (50 mg/kg, p.o.) results in dose-dependent inhibition of popliteal lymph node (PLN) hyperplasia.
The effect of Decernotinib (VX-509) on JAK3 activity is assessed by measuring the residual kinase activity of the recombinantly expressed JAK3 kinase domain using a radiometric assay. The final concentrations of the components in the assay are as follows: 100 mM HEPES (pH 7.5), 10 mM MgCl2, 1 mM dithiothreitol (DTT), 0.01% BSA, 0.25 nM JAK3, 0.25 mg/ml polyE4Y, and 5 μM 33P-γ-ATP (200 µCi/µmol). A 10 mM stock solution of this compound is prepared in DMSO, from which additional dilutions are prepared. A substrate mixture (100 mM HEPES, 10 mM MgCl2, 0.5 mg/ml polyE4Y, and 10 μM 33P-γ-ATP) is added and mixed with it. The reaction is initiated by the addition of an enzyme mixture [100 mM HEPES (pH 7.5), 10 mM MgCl2, 2 mM DTT, 0.02% BSA, 0.5 nM JAK3]. After 15 minutes, the reaction was quenched with 20% trichloroacetic acid (TCA). The quenched reaction was transferred to the GF/B filter plates and washed three times with 5% TCA. Following the addition of Ultimate Gold scintillant (50 μl), the samples were counted in a Packard TopCount gamma counter (PerkinElmer). In this procedure, the radioactivity trapped is a measure of the residual JAK3 kinase activity. From the activity versus concentration of VX-509 titration curve, the Ki value was determined by fitting the data to an equation for competitive tight binding inhibition kinetics using Prism software.
Frozen purified human B cells are thawed, washed, and resuspended in complete medium. Cells are plated onto a 96-well plate at a density of 2 × 105 cells/well. Decernotinib (VX-509) is added, and plates are incubated for 30 minutes at 37°C, followed by stimulation with a combination of 10 ng/ml IL-4 and 1 μg/ml CD40L. DMSO alone is added to the top two rows, one of which is stimulated with IL-4 or CD40L (negative control) and the other of which served as a proliferation control. The plates are incubated at 37°C for 6 days. On day 6, cells are pulsed with [3H]thymidine for 7 hours and harvested onto filters for radioactive determination using a PerkinElmer-Wallace beta counter (1205 Betaplate Beta Liquid Scintillation Counter). Data are analyzed with Softmax pro software to generate an IC50 value.
RETURN POLICY
Selleck Chemical’s Unconditional Return Policy ensures a smooth online shopping experience for our customers. If you are in any way unsatisfied with your purchase, you may return any item(s) within 7 days of receiving it. In the event of product quality issues, either protocol related or product related problems, you may return any item(s) within 365 days from the original purchase date. Please follow the instructions below when returning products.
SHIPPING AND STORAGE
Selleck products are transported at room temperature. If you receive the product at room temperature, please rest assured, the Selleck Quality Inspection Department has conducted experiments to verify that the normal temperature placement of one month will not affect the biological activity of powder products. After collecting, please store the product according to the requirements described in the datasheet. Most Selleck products are stable under the recommended conditions.
NOT FOR HUMAN, VETERINARY DIAGNOSTIC OR THERAPEUTIC USE.
